Operation
Ref number Item Description
11 Run
Starts and sto
ps data acquisitions. When the instrument is acquiring data, the
button label has green lettering. When stopped, the label has black lettering.
You can specify the run conditions in the Run menu. For example, if you
select Single
Sequence in the Run menu, when you click the R un button,
the instrument will run a single measurement cycle and stop. If you s elect
Continuous, the instrument will run continuously until you stop the acquisitions.
12
Check Mark indicator
The check mark indicator (
) in the upper, left-hand corner of the display
indicates the display for which the ac quisition hardware is optimized. When
Best for multiple windows is selected in the Amplitude control panel’s RF & IF
Optimization control, none of the measurement displays shows a checkmark,
as there i s not a single optimized measurement.
13
Displays the Open dialog box so you can recall a setup fi le or an acquisition
data file.
14
Opens the Save As dialog box so you can save a setup, screen capture,
acquisition data file, or export results or settings.
15
Displays the Main Presets dialog window or recalls Preset (Main), depending
on current settings.
RSA6100A Series & RSA5100A Series Q uick Start User Manual 25
To Next Page
Loading...
