Operation
Searching Sign als
The RSA6100A Series Real-Time S pectrum Analyzers and RSA5100A Series R eal-Time Signal Analyzers let you search the
Spectrum display’s trace results for changes in power level. You c an identify matches crossing a power level or you can
create a mask that specifies power level and frequency range limits. You can select which trace to search and specify an
action to take when a search match occurs. Pass/Fail results from the Spurious and Settling Time measurements are also
searchable, but we will use the Spectrum trace example here.
To search a trace:
1. Open the Spectrum display or select the
Spectrum display if it is already open.
2. Select Tools > Search.
3. Select the Enable Search check box.
4. Select the trace you wish to search from
the Search in drop-down list box.
5. Verifythatthetraceyouselectedinthe
Search in list is the selected trace and
that the Show box is checked.
RSA6100A Series & RSA5100A Series Q uick Start User Manual 57
To Next Page
Loading...
