Operation
7. Click the Actions tab to specify what
actions the analyzer should take when a
match occurs.
The analyzer can take up to five actions
when a match occurs, depending on the
run mode. In R
un mode, the analyzer
can sound a beep, stop acquisitions,
save acquisition data, save trace data,
and save a pic
ture of the display. In
Replay mode, it can sound a beep and
stop analyzing.
8. To have the analyzer take an action
when a matc
h occurs, select the desired
action.
You can select any combination of
actions to
perform on a match. If you
select all actions, they will all occur when
a match is found (in R un mode).
9. Click the close box to remove the Search
control p
anel.
10. Press the Run button to initiate a search.
Red line
s appear in the graph display
when there is a match on incoming data.
Click the Replay button on the toolbar
to initi
ate a search on the current data
record.
RSA6100A Series & RSA5100A Series Q uick Start User Manual 59
To Next Page
Loading...
