TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
1–1
Product Description
Your Tektronix digitizing oscilloscope is a superb tool for acquiring, displaying,
and measuring waveforms. Its performance addresses the needs of both lab and
portable applications with the following features:
200 MHz maximum analog bandwidth on the TDS 420A
400 MHz maximum analog bandwidth on the TDS 430A, TDS 460A
500 MHz maximum analog bandwidth on the TDS 510A
500 Megasamples/second maximum digitizing rate on the TDS 510A
100 Megasamples/second maximum digitizing rate on the TDS 420A,
TDS 430A, and TDS 460A
Roll mode and triggered roll mode for display of slower waveforms on the
TDS 420A, TDS 430A, and TDS 460A
Waveform Math — Invert a single waveform and add, subtract, and multiply
two waveforms. On instruments equipped with option 2F, integrate or
differentiate a single waveform or perform an FFT (fast fourier transform) on
a waveform to display its magnitude or phase versus its frequency.
Up to 30,000-point record length per channel (120,000-point optional) on the
TDS 420A, TDS 430A, and TDS 460A. Up to 50,000-point record length
per channel on the TDS 510A
Full GPIB software programmability. GPIB hardcopy output. On instru-
ments equipped with option 13, hardcopy output using the RS-232 or
Centronics ports.
Complete measurement and documentation ability
Intuitive graphical icon operation blended with the familiarity of traditional
horizontal and vertical knobs
To Next Page
Loading...
Need help?
General
