Tektronix TDS 420A User Manual

TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
3–1
Overview
This chapter describes the details of operating the digitizing oscilloscope. It
contains an alphabetical list of tasks you can perform with the digitizing
oscilloscope. Use this chapter to answer specific questions about instrument
operation. The following tasks are included:
 Accessing Help  Remote Communication
 Acquisition Modes  Roll Mode
 Delayed Triggering  Saving and Recalling Setups
 Determining Status  Saving and Recalling Waveforms
 Display Modes  Selecting Channels
 Edge Triggering  Setting up Automatically
 Fast Fourier Transforms  Signal Path Compensation
 File System  Taking Cursor Measurements
 Hardcopy  Vertical Control
 Horizontal Control  Video Triggering
 Limit Testing  Waveform Differentiation
 Measuring Waveforms  Waveform Integration
 Probe Cal  Waveform Math
 Probe Compensation  Zoom
 Pulse Triggering
Many of these tasks list steps you perform to accomplish the task. You should
read Conventions on page x of Preface before reading about these tasks.

Tektronix TDS 420A Specifications

General

Brand	Tektronix
Model	TDS 420A
Category	Test Equipment
Language	English