Waveform Differentiation
3–132
TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
Derivative Math Waveform
Source Waveform
Figure 3–73: Derivative Math Waveform
Do the following steps to display automated measurements of the waveform:
1. Be sure MORE is selected in the channel selection buttons and that the
differentiated math waveform is selected in the More main menu.
2. Press MEASURE
➞ Select Measrmnt (main).
3. Select up to four measurements in the side menu (see Figure 3–74).
Automated Measurements
of a Derivative Waveform
To Next Page
Loading...
