TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
A–1
Appendix A: Options and Accessories
This appendix describes the various options and accessories that are available for
the TDS 420A, TDS 430A, TDS 460A, and TDS 510A Digitizing Oscilloscopes.
Options
The following options are available:
See Option XL.
This option (standard on the TDS 400A) provides a video trigger. It lets you
trigger on positive or negative sync pulses. It allows you to investigate a range of
NTSC, PAL, SECAM, and high definition TV signals.
TDS 510A only. With this option, Tektronix ships the oscilloscope equipped
with an RS-232 and a Centronics interface that can be used to obtain hardcopies
of the oscilloscope screen.
TDS 400A only. See Option XL.
With this option, Tektronix ships a K420 instrument cart.
Tektronix ships the digitizing oscilloscope, when ordered with Option 1R,
configured for installation in a 19 inch wide instrument rack. Customers with
instruments not configured for rackmounting can order a rackmount kit
(016-1166-00) for field conversions.
TDS 510A only. With this option, the oscilloscope can compute and display
three advanced math waveforms: integral of a waveform, differential of a
waveform, and an FFT (Fast Fourier Transform) of a waveform.
TDS 400A only. See Option XL.
See Option XL.
Option 02: Front Cover
and Pouch (TDS 400A
Only)
Option 05: Video Trigger
Option 13:
RS-232/Centronics
Hardcopy Interface
Option 1K: Instrument
Cart (TDS 510A Only)
Option 1R: Rackmounted
Digitizing Oscilloscope
Option 2F: Advanced DSP
Math
Option 1M: 120,000 Point
Record Length (TDS 400A
Only)
To Next Page
Loading...
