Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–177
is the units of percent. It ranges from 0% to 93.75% (for 4M and 8M) or
95% (for 2M).
If fit-to-screen is on or extreme zoom factors are on, then the recordstart is
automatically set to 0.
The query form returns a value from 0 to 93.75 (%) for 4M and 8M or 95 (%) for
2M. This is the figure for a specific sample.
would set the record to start at 23%.
HORizontal:ROLL
TDS 400A Only
Sets roll mode to auto or off.
Horizontal
! " " #
or = 0 turns off roll mode.
or 0 turns on roll mode – if the time/division is set appropriately.
Arguments
Returns
Examples
Group
Syntax
Arguments
To Next Page
Loading...
