Command Descriptions
2–182
TDS Family Oscilloscope Programmer Manual
CURve, LIMit:COMPARE:MATH<x>, LIMit:TEMPLate, LIMit:TEM-
PLate:DESTination, LIMit:TEMPLate:SOUrce, WFMPre
is a reference waveform.
specifies that no template testing is to be done for the specified channel.
specifies REF1 as the template waveform against which to compare waveforms
acquired using CH1.
might return , indicating that waveforms acquired
using CH2 will be compared to the template waveform stored in REF4.
LIMit:COMPARE:MATH<x>
TDS 510A, 500C, 600B, & 700C Only
Sets or queries the template against which to compare a math waveform. The
template can be a waveform saved in any of the reference locations REF1
through REF4, or none.
Limit Test
CURve,LIMit:TEMPLate, LIMit:TEMPLate:DESTination, LIMit:TEM-
PLate:SOUrce, WFMPre
Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax
To Next Page
Loading...
