Tektronix TDS 420A Programmer's Manual

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–233
LOW
?
<Space> <NR3>
MEASUrement :
REFLevel
:
ABSolute
:
<NR3> is the low reference level, in volts. The default is 0.0 V.
MEASUREMENT:REFLEVEL:ABSOLUTE:LOW?
might return 0.0E+0 as the low reference level.
MEASUrement:REFLevel:ABSolute:MID
Sets or queries the mid reference level, and is the 50% reference level when
MEASUrement:REFLevel:METHod is set to ABSolute. This command is
equivalent to setting the Reference Levels in the Measure menu.
Measurement
MEASUrement:REFLevel:ABSolute:MID <NR3>
MEASUrement:REFLevel:ABSolute:MID?
MID
?
<Space> <NR3>
MEASUrement
:
REFLevel
:
ABSolute
:
<NR3> is the mid reference level, in volts. The default is 0.0 V.
MEASUREMENT:REFLEVEL:ABSOLUTE:MID .71
sets the mid reference level to .71 volts.
Arguments
Examples
Group
Syntax
Arguments
Examples

Tektronix TDS 420A Specifications

General

Brand	Tektronix
Model	TDS 420A
Category	Test Equipment
Language	English