Command Descriptions
2–240
TDS Family Oscilloscope Programmer Manual
clears the message from the window.
MESSage:BOX
Defines the size and position of the message window. This command does not
display the window unless MESSage:STATE is ON.
Display
and = 0 to 640, and are pixel positions along the horizontal axis.
defines the left and defines the right side of the window.
and = 0 to 480, and are pixel positions along the vertical axis.
defines the top and defines the bottom of the window. The reserved height
of all characters is 15 pixels so the window must be at least that high to fully
display characters. For a complete list of character widths in pixels, see Table
A–1 on page A–1. Shorter windows clip characters.
Figure 3-1 shows the coordinate system relative to the screen.
Examples
Group
Syntax
Arguments
To Next Page
Loading...
