Tektronix TDS 420A - Page 261

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–247
Miscellaneous
PASSWord
*PUD <Block>
*PUD?
*PUD
?
<Space>
<Block>
<Block> is a string containing up to 100 characters.
*PUD #229This instrument belongs to me
stores the string “This instrument belongs to me” in the user protected data area.
*PUD?
might return #221Property of Company X.
*RCL (No Query Form)
Restores the state of the digitizing oscilloscope from a copy of its settings stored
in memory. (The settings are stored using the *SAV command.) This command
is equivalent to RECAll:SETUp and performs the same function as the Recall
Saved Setup item in the front-panel Save/Recall Setup menu.
Save and Recall
DELEte:SETUp, FACtory, *LRN?, RECAll:SETUp, *RST, *SAV, SAVe:SETUp
*RCL <NR1>
<NR1>*RCL <Space>
<NR1> is a value in the range from 1 to 10, and specifies a setup storage location.
Using an out-of-range value causes an execution error (222, “Data out of range”).
Group
Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax
Arguments