Tektronix TDS 420A - Page 280

Command Descriptions
2–266
TDS Family Oscilloscope Programmer Manual
TRIGger :
DELay
SETLevel
?
<Space>
SETLevel sets the delayed trigger level to half way between the MIN and MAX
amplitudes of the trigger source input. This is equivalent to selecting Set to 50%
in the Delayed Edge Level side menu.
TRIGGER:DELAY SETLEVEL
sets the delayed trigger level to 50% of MAX and MIN.
TRIGGER:DELAY?
might return :TRIGGER:DELAY:TYPE EDGE;LEVEL 0.0E+0;BY
TIME;EDGE:SOURCE CH1;SLOPE RISE;COUPLING DC;:TRIGGER:DELAY:TIME
16.0E-9;EVENTS:COUNT 2
TRIGger:DELay:BY
Selects whether the delayed trigger occurs after a specified number of events or a
specified period of time after the main trigger. This is equivalent to setting Delay
by in the Delayed Trig menu.
Trigger
TRIGger:DELay:EVENTS:COUNt, TRIGger:DELay:TIMe
TRIGger:DELay:BY
{ EVENTS | TIMe | EVENTSTime (TDS 510A, 500C, 600B, & 700C only) |
RUNSAfter }
TRIGger:DELay:BY?
EVENTSTime
:
DELay
TRIGger
<Space>
?
TIMe
:
BY
EVENTS
RUNSAfter
Arguments
Examples
Group
Related Commands
Syntax