Tektronix TDS 420A - Page 294

Command Descriptions
2–280
TDS Family Oscilloscope Programmer Manual
CH<x> specifies one of the input channels.
TRIGGER:MAIN:COMMUNICATION:SOURCE CH2
selects Channel 2 as the source for the main communication trigger.
TRIGger:MAIn:COMMunication:STANdard
TDS 500C & 700C Only
Sets or queries the communication trigger standard which identifies the code and
bit rate.
Trigger
TRIGger:MAIn:COMMunication:STANdard { DS1 | DS1A | DS1C | DS2 |
DS3 | DS4NA | E1 | E2 | E3 | E4 | E5 | STS1 | STS3 | OC1 | OC3 |
OC12 | STM1E | FC133 | FC266 | FC531 | FC1063 | FDDI | D1 | D2 |
CUSTom }
TRIGger:MAIn:COMMunication:STANdard?
Arguments
Examples
Group
Syntax