Command Descriptions
2–288
TDS Family Oscilloscope Programmer Manual
" #
" #
"
#
!
is from 0 to 100, and is a percent of the holdoff range.
set the holdoff value to be 10% of the holdoff range.
TRIGger:MAIn:LEVel
Sets the main trigger level. This command is equivalent to adjusting the
front-panel TRIGGER MAIN LEVEL knob.
With Communications triggers, this command makes no change to AMI
thresholds. It does change CMI and NRZ levels. It makes no change to value
ranges.
Trigger
" $ % % &
"
"
!
specifies a preset ECL level of –1.3 V.
specifies a preset TTL level of 1.4 V.
is the main trigger level, in volts.
might return , indicating that the main edge trigger is set to 1.4 V.
Syntax
Arguments
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
