Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–303
specifies that the main logic trigger when the logic pattern is true.
TRIGger:MAIn:MODe
Sets or queries the main trigger mode. This command is equivalent to selecting
Mode & Holdoff in the Trigger menu.
Trigger
!
generates a trigger if a trigger is not detected within a specific time period.
waits for a valid trigger event.
specifies that a trigger event is automatically generated.
TRIGger:MAIn:PULse? (Query Only)
Not on TDS 400A
Returns the main pulse trigger parameters.
Trigger
Examples
Group
Syntax
Arguments
Examples
Group
To Next Page
Loading...
