Tektronix TDS 420A - Page 321

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–307
<Space>
EITher
?
POSITIVe
NEGAtive
TRIGger :
MAIn
POLarity
:
PULse
:
:GLItch
TRIGGER:MAIN:PULSE:GLITCH:POLARITY EITHER
specifies that the polarity of the glitch can be either positive or negative.
TRIGger:MAIn:PULse:GLItch:WIDth
Not on TDS 400A
Sets or queries the width for the main pulse glitch trigger. This command is
equivalent to selecting Polarity & Width in the Trigger menu.
Trigger
TRIGger:MAIn:PULse:GLItch:WIDth <NR3>
TRIGger:MAIn:PULse:GLItch:WIDth?
?
<Space> <NR3>
TRIGger
:
:
PULse
MAIn
GLItch
:
:
WIDth
<NR3> is the width of the glitch, in seconds.
TRIGGER:MAIN:PULSE:GLITCH:WIDTH 15E-6
sets the width of the glitch to 15 ms.
TRIGger:MAIn:PULse:RUNT? (Query Only)
Not on TDS 400A
Returns the current parameters for the main pulse runt trigger.
Examples
Group
Syntax
Arguments
Examples