Appendix D: Factory Initialization Settings
D–2
TDS Family Oscilloscope Programmer Manual
Table D–1: Factory Initialization Settings (Cont.)
Control Changed by Factory Init to
Delayed edge trigger coupling
(TDS 400A only)
DC
Main Trigger
Delayed edge trigger level 0 V
Delayed edge trigger slope Rising
Delayed edge trigger source Channel 1
Delayed, time base mode Delayed Runs After Main
Deskew, Channel/Probe 0 seconds
Display clock No Change
Display color – collision contrast TDS 644B, 684B, & 700C:
Off
Display color – map math colors TDS 644B, 684B, & 700C:
Color ‘Math’
Display color – map reference colors TDS 644B, 684B, & 700C:
Color ‘Ref’
Display color – palette TDS 644B, 684B, & 700C:
Normal
Display color – palette colors TDS 644B, 684B, & 700C:
The colors of each palette are reset to factory
hue, saturation, and lightness (HLS) values
Display color – persistence palette TDS 644B, 684B, & 700C:
Temperature
Display format YT
Display graticule type Full
Display instavu persistence TDS 500C & 700C: Varpersist
Display instavu style TDS 500C & 700C: Vectors
Display instavu varpersist TDS 500C & 700C: 500 e–3
Display intensity – contrast TDS 400A, 500C, 620B, & 680B: 175%
TDS 510A: 150%
Display intensity – overall TDS 400A, 510A, 500C, 620B, & 680A: 85%
Display intensity – text TDS 644B, 684B, & 700C: 100%
TDS 400A, 510A, 500C, 620B, & 680B: 60%
Display intensity – waveform TDS 644B, 684B, & 700C: 100%
TDS 400A, 510A, 500C, 620B, & 680B: 75%
Display interpolation filter Sin(x)/x
Display mode Normal
Display style Vectors
To Next Page
Loading...
