Command Descriptions
2–68
TDS Family Oscilloscope Programmer Manual
autosets the displayed waveform.
BELl (No Query Form)
Beeps the audio indicator of the digitizing oscilloscope.
Miscellaneous
rings the bell.
BUSY? (Query Only)
Returns the status of the digitizing oscilloscope. This command allows you to
synchronize the operation of the digitizing oscilloscope with your application
program. Synchronization methods are described on page 3–7.
Status and error
*OPC, *WAI
= 0 means that the digitizing oscilloscope is not busy processing a
command whose execution time is extensive. These commands are listed in
Table 2–27.
= 1 means that the digitizing oscilloscope is busy processing one of the
commands listed in Table 2–27.
Arguments
Group
Syntax
Examples
Group
Related Commands
Syntax
Returns
To Next Page
Loading...
Need help?
General
