Tektronix TDS1002 User Manual

TDS1000/2000-Series Digital Oscilloscope User Manual
41
Application Examples
This section presents a series of application examples. These
simplified examples highlight the features of the oscilloscope and
give you ideas for using it to solve your own test problems.
H Taking simple measurements
Using Autoset
Using the Measure Menu to take automatic measurements
Measuring two signals and calculating gain
H Taking cursor measurements
Measuring ring frequency and ring amplitude
Measuring pulse width
Measuring rise time
H Analyzing signal deta il
Looking at a noisy signal
Using the average function to separate a signal from noise
H Capturing a single-shot signal
Optimizing the acquisition
H Measuring propagation delay
H Triggering on a pul se width
H Triggering on a vi deo signal
Triggering on video fields and video lines
Using the window function to see waveform details
H Analyzing a differential communication signal using math
functions
H Viewing impedance change s in a network using XY mode and
persistance

Tektronix TDS1002 Specifications

General

Bandwidth	60 MHz
Channels	2
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Sensitivity	2 mV/div to 5 V/div
Vertical Resolution	8 bits
Display Resolution	320 x 240 pixels
Display	5.7 inch monochrome LCD
Trigger Modes	Video, Edge
Connectivity	USB 2.0
Weight	2.0 kg
Input Impedance	1 MΩ
Power Supply	100 to 240 VAC, 45 to 440 Hz