Application Exa
mple
NOTE. If you have an input and reference combination that requires m ultiple timing indicator circles, then it can be
misleading to c
ompare timing offsets between multiple inputs. Because the timing display chooses the smallest of the
possible timing offsets, if a large timing difference exists between two inputs, then they may not be matched. This problem
will also occur using traditional timing methods unless one uses something similar to the SMPTE318 10 field flag to identify a
specific sub-m
ultiple of the reference.
Waveform Rasterizers Quick Start User Manual 123
To Next Page
Loading...
Need help?
General
