Chapter 2 Teldat Connect-FW
Fig. 1: Teldat Connect-FW
2.1 Characteristics
2.1.1 Power supply
For further information on the different Teldat Connect-FW power supplies, please see Components and Power
Supply on page 4, Power source on page 10.
2.1.2 Hardware monitoring
The LEDs on the front panel are used to monitor the hardware in the Teldat Connect-FW router. These LEDs
provide visual information on the state of the device and reference the condition of the hardware components, indic-
ating whether or not there is connectivity, data flow, etc.
For further information on the LED panel, please see Components on page 4.
Teldat S.A.
2 Teldat Connect-FW
Teldat Connect-FW 3
To Next Page
Loading...
