Percent Oxygen Analyzer
Teledyne Analytical Instruments vii
3.5 Installation Checklist 22
Operation ..................................................................................... 23
4.1 Introduction 23
4.2 Using the Function and Data Entry Buttons 24
4.3 Setting the Analysis Ranges 24
4.3.1 HI Range 25
4.3.2 LO Range 25
4.4 Setting the Alarm Setpoints 25
4.4.1 HI Alarm 25
4.4.2 LO Alarm 26
4.4.3 Sensor Fail Alarm 26
4.5 Selecting a Fixed Range or Autoranging 26
4.6 Calibration 26
Maintenance ................................................................................. 29
5.1 Replacing the Fuse 29
5.1.1 AC Powered Units 29
5.1.2 DC Powered Units 30
5.2 Sensor Installation or Replacement 30
5.2.1 When to Replace a Sensor 30
5.2.2 Ordering and Handling of Spare Sensors 31
5.2.3 Removing the Oxygen Sensor 32
5.2.4 Installing the Oxygen Sensor 32
5.2.5 Cell Warranty Conditions 33
Appendix ...................................................................................... 35
A.1 Specifications 35
A.2 Spare Parts List (Standard Version) 36
A.3 Drawing List (Standard Version) 37
A.4 Miscellaneous 37
To Next Page
