TELES iGATE FCT User’s Guide 9
Previous Page Table of Contents Next Page
Instructions for Users
We recommend distributing the following instructions to all
iGATE FCT users.
• Do not wait more than 3 seconds between the digits of
the dialed number.
• For PABX's without LCR, the system administrator
must explain how to select the proper gateway, that is,
what prefix to dial.
• If Toll Restriction is active in a PABX without LCR,
some destinations will not be reachable because the
call will be too expensive. Use the proper prefix.
• If Call Duration Limit is active, calls longer than the
time limit will be cut.
• The iGATE FCT collects the dialed digits and places
the call when one of the following occur:
• the # key is pressed
• the Inter-digit timeout period expires. See
“Interdigit Timeout” on page 15. The default
timeout is 3 seconds.
• if Immediate Dialing is enabled, when the defined
number of digits are dialed. See “Immediate
Dialing” on page 15.
To Next Page