TELES iGATE FCT - GET Command Table

TELES iGATE FCT User’s Guide 23
Previous Page Table of Contents Next Page
SET Command Table
VGT Gets the Tx Audio gain
TRANSMIT GAIN (+6 - -24)
intervals of 2 db
CEL
Gets the current regis-
tered cell information
Main Cell is: "Response
depends on the GSM Net-
work"
SIG
Gets the signalling
method
Line Signal is Reverse Polar-
ity/Pulse Drop, XX
Table 6: GET Command Table
Command
Syntax
Command Feature Applicable Response
Table 7: SET Command Table
Command
Syntax
Command Feature Applicable Response
SIG=P
Set Signalling method to
Pulse Drop.
Line Signal is: Pulse
Drop, XX (Where XX is
the width of the pulse)
SIG=P,XX
Set Signalling type to Pulse
Drop and the Length of the
pulse. Where XX can be 1-
99 (100 milliseconds to 9.9
seconds)
Line Signal is: Pulse
Drop, XX (Where XX is
the width of the pulse)
SIG=R
Set Signalling type to
Reverse Polarity
Line Signal is: Reverse
Polarity
EMB=1
Erase the SMS inbox of the
SIM
Mailbox is Erased
RST=1 Reset the unit Restart Was Done.