TELES iGATE FCT User’s Guide 20
Previous Page Table of Contents Next Page
Other DTMF commands include:
Factory Default Values
• Toll restriction is disabled
• Network lock default depends on the version
• Rx gain - -8db, Tx gain - +36db
• CLIR enabled
• SIM PIN code request disabled. Default PIN code is
1234
• Immediate dialing length is disabled (0)
• Call Duration is unlimited.
• The pulse drop width value is 1.5 seconds.
Table 5: Toll Restriction Commands
Command Result
*9193*#
Disables the Toll Restriction fea-
ture. This does not erase the
entries in the table.
*9195*# fol-
lowed by a
prefix followed
by the # sign
This deletes the dialed prefix. If the
prefix was erased, the unit emits
the confirmation tone. If the prefix
was not in the table, the unit emits
the rejection tone. When the last
prefix is erased, the unit disables
the Toll Restriction feature.
*5351*#
Erase all the Toll Restriction entries.
*
* The prefix numbers do not include the prefix digit
used to exit the PABX environment to the public net-
work (usually "9" or "0").
To Next Page