TELES iGATE FCT User’s Guide 17
Previous Page Table of Contents Next Page
This enables the PIN code request feature and
enters the existing PIN code into the unit. The PIN
code is stored in the unit and is transferred to the
SIM card each time the unit is initiated.
• To enable the feature using a PIN code different from
the existing PIN Code:
a. Dial *6100*#. The unit emits the confirmation
tone.
b. Dial XXXX*, that is, the existing PIN code followed
by the * sign. The unit emits the single tone.
c. Dial YYYY*, that is, the new PIN code followed by
the * sign. The unit emits the single tone.
d. Dial YYYY#. The unit emits the confirmation tone,
enables the new PIN code, and stores it in place of
the existing PIN code.
Note: If this operation failed, the PIN code XXXX was not the one
on the SIM card. See “Troubleshooting” below.
Enabling Protection if the PIN Code is not Known
If you do not know the current PIN code of the unit:
1. Reset the unit to the factory default setting. (See
“Restore Factory Default” on page 18.)
2. Set the SIM card’s PIN to 1234. (To program a SIM
card, place it in a mobile phone and follow the phone’s
menu.)
3. Continue with “Enabling Protection When the PIN
Code is Known” on page 16.
Disabling PIN Code Protection
To disable the feature:
1. Dial ** 1343**#. The unit enters the programming
mode and emits the confirmation tone.
2. Dial *6101*#. The unit emits the confirmation tone.
3. Dial XXXX#. The unit emits the confirmation tone and
disables the PIN code request feature on the SIM.
The PIN code of the SIM card (XXXX) and the one
stored in the unit remain unchanged.
Troubleshooting
If the Stat LED is blinking rapidly, there is an error with the
PIN code entry. There are several ways to resolve this:
• Disable the SIM card’s PIN Code Protection.
• Change the SIM card’s code to match the code of
the unit. (To program a SIM card, place it in a
mobile phone and follow the phone’s menu.)
After the inserting the SIM card into the iGATE FCT,
clear the lock. See “Clearing a Lock” on page 14.
To Next Page