LE910Cx Hardware User Guide
1VV0301298 Rev. 1.05 - 2017-06-18
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
17 of 117
2. General Product Description
2.1. Overview
LE910Cx is Telit’s new LTE series for IoT applications.
In its most basic use case, LE910Cx can be applied as a wireless communication front-end for
telematics products, offering GNSS and mobile communication features to an external host CPU
through its rich interfaces.
LE910Cx is available in hardware variants as listed in Table 1: Applicability Table. For differences in
the designated RF band sets – refer to Section 2.6.1, RF Bands per Regional Variant.
2.2. Applications
LE910Cx can be used for telematics applications where tamper-resistance, confidentiality, integrity,
and authenticity of end-user information are required, for example:
• Emergency call
• Telematics services
• Road pricing
• Pay-as-you-drive insurance
• Stolen vehicles tracking
• Internet connectivity
To Next Page
Loading...
