13
3.8 Setting the receiver volume
The receiver speaker (earpiece) can be adjusted to your preference.
During a call, you can use the buttons, p and q, to adjust the speaker
volume. You can select one of five volume settings.
3.9 Redial
The redial function is especially useful if a number is engaged or the
person does not answer. Your telephone stores the last ten dialled
numbers.
1. Press the button and the last number dialed will appear
on the display.
2. By pressing the p button, you can display the previous
number called. Use the q button to move through the list in
the opposite direction.
3. Next press the button to dial the number shown on the
display.
NOTICE: If a number in the redial list matches a phonebook entry, the
programmed name will replace the number on the display. The
button can be used to toggle between the name and number.
3.7 Muting the handset microphone
You can use the button to turn off the handset microphone during
a call. You can then speak without being heard over the telephone
(secret function). The receiver in the handset remains switched on so
that you can still hear the caller.
1. Press the button during a call. MUTE ON will appear on
the display.
2. To turn the microphone back on, press the button briefly
once again. The words MUTE ON will disappear and you can
continue your call.
To Next Page