Telkom Ultimate Slim D205 - Advanced Settings; Recall Time; Call Barring; Switching Call Barring on and off

23
2. Press the MENU button again.
3. Use the pand qbuttons to select DELETE ALL. Press the
MENU button.
4. The display shows CONFIRM?. Press the MENU button.
5. To exit from the entry mode, press the button.
6. Advanced Settings
6.1 Recall time
1.
2. Use the p and qbuttons to select ADVANCED SET. Press
the MENU button.
3. The display shows RECALL TIME. Press the MENU button.
4. Use the p and qbuttons to select between SHORT,
MEDIUM and LONG. Press the MENU button to confirm.
5. You can then select further menu functions or exit by pressing
the button.
NOTE: Recall is useful to access certain network and PABX /
switchboard services. We suggest that you do not change the Recall
setting unless your PABX required a different setting.
6.2 Call barring
To prevent your telephone from being used to dial a certain group of
numbers, you can store up to four specific number prefixes, each up to
four digits, for example, baring 082, 083, 084 and 07 should prevent
cellphones from being called, while baring 00 will prevent international
calls.
If you switch call barring on, the display will show BARR MODE ON.
6.2.1 Switching call barring on and off
1. Press the MENU button.
2. Use the p and qbuttons to select ADVANCED SET. Press
the MENU button.
3. Use the p and qbuttons to select CALL BARRING. Press
the MENU button.
4. Enter the PIN number (default setting 0000). Press the MENU
button.
5. The display shows MODE. Press the MENU button.
6. Use the p and qbuttons to select ON or OFF. Press the
MENU button to confirm.
7. You can then select further menu functions or exit by pressing
the button.
Press the MENU button.