28
1. Press the
MENU
button.
2.
Use
p and
q
buttons to select PERSONAL SET. Press the
MENU
button.
3. The display shows HANDSET TONE
. Press the
MENU
button.
4.
The display shows
RING VOLUME. Press the
MENU button.
5.
Use p
and
q buttons to select between OFF
,
LOW
,
MEDIUM,
HIGH
, BOOST
and
PROGRESSIVE.
6. Press the
MENU
button to confirm.
7. You can then select further menu
functions or exit by pressing
the button.
7.3
Setting a group melody
This feature enables you to select and set the melodies to be played
when there is an external incoming call from a contact whose name is
stored in the phonebook and is part of a group.
1. Press the MENU
button.
2. Use
p
and
qbuttons to select PERSONAL
SET
. Press
the
MENU button.
3. The display shows
HANDSET TONE
. Press the
MENU
button.
4. Use
p
and qbuttons to select GROUP
MELODY. Press the
MENU
button.
5.
Use p
and q buttons to select
GROUP
A
, B
or
C. Press the
MENU
button.
6.
Use p
and
q
buttons to select the ringtone you want to
assign the group to. Press the MENU
button to confirm.
7. Y
ou can then select further menu functions or exit by pressing
the button.
7.4 Setting auto pick up answer
Incoming calls can be answered automatically when you lift the handset
from the base station. If you wish to take calls by using the button
only, you can turn the auto answer function off.
1. Press the MENU button.
2. Use p and qbuttons to select PERSONAL SET. Press the
MENU button.
3. Use pand qto select AUTO PICK-UP. Press the MENU
button.
4. Use pand qto select ON or OFF. Press the MENU
button to confirm.