18
During a call:
1. Press the MENU button twice.
2. The p and q buttons can now be used to step through the
list of stored numbers.
Or
To jump directly to a number with a name beginning with a
certain letter, press the button with the desired letter.
3. The name will be displayed. Press the button to see the
number. If the number is longer than 12 digits, press the
button again to see the rest of the number.
4. Press the button to cancel the phonebook display and
continue your call.
4.3 Modifying numbers stored in the phonebook
1. Enter the phonebook. The display will show the first stored
number in alphabetical order.
2. Use the p and q buttons to select the entry you wish to
modify. Press the MENU button.
3. The display shows EDIT ENTRY. Press the MENU button
again. The display will now show the name with a blinking
cursor after the last letter.
4. The name can now be changed using the number buttons.
Information on entering names can be found in 4.1.
5. After making the desired modifications to the name, press the
MENU button again. The display shows the phone number.
6. Next modify the phone number using the number buttons. By
pressing the button briefly, individual digits can be
deleted.
7. After making the desired modifications to the number, press
the MENU button again.
8. Use the p and q buttons to select NO GROUP, GROUP A,
B or C. Press the MENU button to confirm (See 4.1).
9. Press the button to return to standby.
To Next Page