36
8.2.1 Adding an outgoing external call to an internal conversation
1. During a call, press the MENU button.
2. Use the pand qto select INT 2NDCALL. Press
the MENU button.
3. The display shows CALLING R. Enter the second number.
4. When your second caller answers, press the MENU button to
open the options menu:
- CONFERENCE: Press the MENU button to initiate a 3-way
with an external caller and internal caller.
- SWITCH CALLS: Press the MENU button to switch between
the two callers.
5. Press the button to hang up.
8.3 Registering and de-registering handsets
8.3.1 Registering handsets
1. Hold down the button on the base station for 3 seconds.
You now have 90 seconds to register the new handset.
2. Press the MENU button on the handset.
3. Use the pand qto select ADVANCED SET. Press
the MENU button.
4. Use the pand qbuttons to select REGISTRATION. Press
the MENU button.
5. If necessary, use the pand qbuttons to display REGIST.
BASE. Press the MENU button.
6. BASE 1 2 3 4 appears on the display.
7. Now use the number buttons to enter the number of the base
station (1-4). If the handset is already registered with a base
station, the corresponding numbers will blink.
8. When the base is located, you will hear a confirmation beep
and PIN---- appears on the display.
9. Now enter the PIN number for the new base station (factory
setting, 0 0 0 0).
10. Now press the MENU button, and you will hear a beep for
a few seconds. The handset is now registered and can be
used for external and internal calls.
11. An internal number has now been allocated to the handset.
The first handset registered (main handset) has the internal
number 1 allocated to it. The second handset to be logged on
is given the internal number 2. This internal number is shown
on the display to the right hand side of the handset name.
buttons
buttons
To Next Page