20
4.6.1 Dialing a number from the quickdial memory
1. Press and hold the button 1-9.
2. The telephone will automatically dial the number stored in that
memory location.
4.6.2 Deleting a number stored in the quickdial memory
1. Press the MENU button. Press the MENU again to select
PHONEBOOK.
2. Use the p and q buttons to select DIRECT MEM. Press the
MENU button.
3. Use the p and q buttons to select KEY 1-9. Press the MENU
button again. The current name will be displayed.
4. Press the MENU button again.
5. Use the p and q buttons to select DELETE. Press the
MENU button.
6. The display shows CONFIRM?. Press the MENU button again
to delete the number.
7. To exit from the programming mode, press the button.
To Next Page