Telrad BreezeCOMPACT 3000 - IP Address Configuration; IP Address Configuration Restrictions; IP Subnets

Chapter 3 - Operation and AdministrationIP Address Configuration
Chapter 3: Operation and Administration
IP Address Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BreezeCOMPACT System ManualBreezeCOMPACT System Manual
49
3.3 IP Address Configuration
3.3.1 IP Address Configuration Restrictions
The following IP addresses should not be used and will be rejected:
 0.0.0.0
 224.0.0.0 – 255.255.255.255 (Multicasts, RFC 3171 D, RFC 1700 E)
3.3.2 IP Subnets
In a binary representation (32 bits), a Subnet Mask string must comprise a series of contiguous binary 1s starting from the
MSB, followed by a series of contiguous binary 0s.
Subnet Masks 0.0.0.0 (all zeros, meaning nothing) and 255.255.255.255 (all ones, meaning this address only) are illegal and
will be rejected.