Need help?Do you have a question about the Telrad BreezeCOMPACT 3000 and is the answer not in the manual?
Details general specifications for modem and radio components.
Introduces the commissioning process and refers to the installation guide.
Details system verification steps and management connectivity configuration.
Describes the required steps to activate the unit after configuration.
Explains the need for basic parameter configuration for unit discovery.
Directs users to the Quick Installation Guide for detailed installation procedures.
Describes the BTS self-test procedure and LED status indications.
Explains the meaning of PWR, ALRM, and GPS LED indicators.
Explains how to configure a unique BTS number for network management.
Details setting connectivity mode and IP parameters for management.
Details how to configure SNMP managers for system access and security.
Explains how to configure SNMP Traps Managers for network monitoring.
Describes how to reset the unit to apply configuration changes.
Lists the mandatory steps to activate the unit after configuration.
Guides on creating a BS using the Monitor program and its mandatory parameters.
Explains how to create a BS using the management system interface.
Details how to configure radio cluster parameters using the Monitor program.
Explains radio cluster parameter configuration via the management system.
Guides on associating antennas with RF ports using Monitor or Management system.
Describes how to apply configuration changes by resetting the unit.
Introduces managing the BTS using various options.
Details how to access and use the Monitor program for system management.
Explains IP address configuration and restrictions.
Outlines navigation for BTS, Sector, BS, Chassis, GPS, RH, Spectrum, and Load Balancing.
Outlines the options for managing the BTS via SNMP or Telnet.
Guides on accessing the Monitor program using the local management interface via Telnet.
Explains accessing the Monitor program via the external management interface.
Explains the program's menu structure, navigation rules, and common action options.
Describes general BTS parameters like number, name, and address.
Explains the different IP domains used for traffic types.
Allows selection between In Band, Out of Band, and Unified connectivity modes.
Lists parameters for bearer and external management IP interfaces.
Configures the IP address, subnet mask, and gateway for the bearer interface.
Sets the VLAN ID for bearer traffic and configures Sector 1 authenticator IP.
Configures the default authenticator IP for Sector 2.
Configures external management IP address, subnet mask, gateway, and VLAN ID.
Configures the IP address for the local management interface.
Configures the subnet mask for the local management interface.
Describes Ethernet ports DAT1, DAT2, DAT3 and their functionality based on connectivity mode.
Sets the port speed and duplex mode for the physical interface.
Manages primary and secondary pools of ASN-GWs for load balancing.
Configures the timeout period for automatic Monitor program exit.
Manages the BTS software versions (Operational and Shadow).
Resets the BTS and sets the Shadow version as operational.
Covers options for resetting the BTS or restoring factory defaults.
Enables viewing and managing configuration backup files.
Configures automatic daily backup and initiates manual backup of BTS configuration.
Sets the IP address of the TFTP server for software downloads.
Manages SNMP Traps Managers for receiving network alerts.
Allows adding, selecting, updating, or deleting SNMP Traps Managers.
Allows selection of existing SNMP Traps Managers for management.
Defines authorized management stations using SNMP communities.
Sets the community string for read-only SNMP access.
Sets the community string for read/write SNMP access.
Selects an existing authorized manager for viewing, updating, or deleting.
Configures modes to mitigate interference from tropospheric ducting.
Details functionality of ducting mitigation modes for 5/10 MHz bandwidth.
Details functionality of ducting mitigation modes for 7 MHz bandwidth.
Sets the mode for allocating excess bandwidth (Equal Rate or Equal Time).
Controls the operation mode (shutDown, noShutDown, rxOnly) of each RF port.
Covers enabling/disabling and configuring the spectrum analyzer feature.
Starts, aborts, and sets default configuration for spectrum scanning.
Shows the results of spectrum analysis, sortable by frequency or noise level.
Explains load balancing between two carriers in a single sector.
General| Brand | Telrad |
|---|---|
| Model | BreezeCOMPACT 3000 |
| Category | Accessories |
| Language | English |
To Next Page
