Telrad BreezeCOMPACT 3000 - Scheduler Configuration; Scheduler Mode Configuration; Scheduler DL Abuse Protection Level; Scheduler UL Abuse Protection Level

Chapter 3 - Operation and AdministrationBS Menu
Chapter 3: Operation and Administration
BS Menu
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BreezeCOMPACT System ManualBreezeCOMPACT System Manual
87
A change in the Scheduler Mode takes effect after the next reset.
3.7.2.8.2 Scheduler DL Abuse Protection Level
Applicable only if the selected Scheduler Mode is Equal Rate:
 None: No Protection
 Low: Limits the DL resources allocated to MSs with a very low DL transmission rate
 Medium: Limits the DL resources allocated to MSs with a low and very low DL transmission rate
The default is None.
A change in the Scheduler DL Abuse Protection Level takes effect after the next reset.
3.7.2.8.3 Scheduler UL Abuse Protection Level
Applicable only if the selected Scheduler Mode is Equal Rate:
 None: No Protection
 Low: Limits the UL resources allocated to MSs with a very low UL transmission rate
 Medium: Limits the UL resources allocated to MSs with a low and very low UL transmission rate
The default is None.
A change in the Scheduler UL Abuse Protection Level takes effect after the next reset.