Telrad CPE9000 - Page 29

LTE Outdoor CPE | User Manual P. 29
LAN IP: LAN IP of CPE
WAN IP: WAN IP of CPE
Status:
means Firewall is enabled
means Firewall is disabled.
Device Name: Name of LTE CPE in LAN side
Device Name Telrad_2C3263 is just an example.
In general, it looks like XXXXX_YYYYYY
(XXXXX = Service Provider)
(YYYYYY = Last six words of WAN MAC.)
Device Up Time:
The uptime from the bootup of
LTE CPE
Uplink / Downlink
Data Rate:
Uplink / Downlink Rate of the
LTE CPE
Service Provider:
The service provider of this LTE
CPE.
(Generic is just an example)
Firmware Version:
Firmware Version of this LTE
CPE.