Telrad CPE9000 - Network | Routing (Available in Tunnel, Router Mode)

LTE Outdoor CPE | User Manual P. 67
Network | Routing (Available in Tunnel, Router Mode)
Network > Routing
Users can designate routing rules of CPE
● Static Routing: Enable/Disable static routing.
●
Click “Add +” button to add a new rule, clicking “Delete” icon ) to delete the rule.
●
Name: Name of the rule.
●
Enable: Enable/Disable the rule.
●
Interface: The interface that the rule is applied to.
●
Gateway: The gateway of the routing rule
●
Metric: The metric of the routing rule. It’s the distance related to the route.
●
Destination IP: The destination IP or a subnet.
●
Netmask: The subnet mask of the rule.