Telstra 13150 - Setup: Base and Handset Installation

11
SETTING UP
Telephone base installation
Plug the mains power adapter cable into the base station, plug the other end of
the mains power adapter into a mains power wall socket.
Insert one end of the telephone line cord into the base station and the other end
of the telephone line cord into a telephone wall jack. If you have DSL high speed
internet service, a DSL lter (not included) is required.
1.
2.
Note: Ensure power cord is fed through slot on base so unit sits ush with the
desk.
Telephone base installation
Telephone line cord
If you have DSL high-
speed Internet service, a
DSL lter (not included) is
required.
Telephone base
power adapter
Mains power
wall socket
Telephone line jack
Power cord jack