Telstra 13150 - Remote Access Code; Recording Time

48
REMOTE ACCESS CODE
A four-digit security code is required to access the answering system remotely from
any touch-tone telephone. The preset code is 0000. You can set the code from 0000
to 9999.
To turn ON/OFF the remote access:
Press MENU when the phone is not in use. And then press or to scroll to
ANS. MACHINE.
Press SELECT and or to scroll to TAM SETTINGS.
Press SELECT and or to scroll to REMOTE ACC..
Press SELECT and or to choose ON or OFF.
Press SELECT to conrm your selection. You hear a conrmation tone.
To change the PIN code:
Press MENU when the phone is not in use. And then press or to scroll to
ANS. MACHINE.
Press SELECT and or to scroll to TAM SETTINGS.
Press SELECT and or to scroll to CHANGE PIN.
Press SELECT and enter the old system PIN.
Press SELECT and enter the new system PIN.
Press SELECT and enter the new system PIN again.
Press SELECT to conrm. You hear a conrmation tone.
RECORDING TIME
You can set the recording time limit for each incoming message.
Press MENU when the phone is not in use. And then press or to scroll to
ANS. MACHINE.
Press SELECT and or to scroll to TAM SETTINGS.
Press SELECT and or to scroll to RECORD TIME.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.