Telstra 13150 - Flash Time; Change System PIN Code

37
fLASH TIME
The ash time settings are country dependent. Please contact your local service
provider for the correct settings.
Press MENU when the handset is not in use.
Press or to scroll to BS SETTINGS.
Press SELECT and or to scroll to FLASH TIME.
Press SELECT and or to select the desired ash time (SHORT, MEDIUM,
LONG).
Press SELECT to conrm. You hear a conrmation tone.
CHANGE SYSTEM PIN CODE
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorized use. The default
system PIN code is 0000.
Press MENU when the handset is not in use.
Press or to scroll to BS SETTINGS.
Press SELECT and or to scroll to CHANGE PIN.
Press SELECT and enter the old system PIN.
Press SELECT and enter the new system PIN.
Press SELECT and enter the new system PIN again.
Press SELECT to conrm. You hear a conrmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.