Why does my TemperZone TZT-701 Thermostat fan stop and start intermittently?
If the fan in your TemperZone Thermostat sometimes stops and starts intermittently while heating or cooling is running, this may not be a fault. Check the fan coil sensor temperature, as the fan coil may not be at the correct temperature for fan operation. Also, check Function switch 1, 2 & 4 for correct position.
Why don't some buttons work on my TemperZone TZT-701 Thermostat?
If some buttons on your TemperZone Thermostat do not appear to operate, it is possible that the keyboard lock is enabled. To unlock the buttons, enter installer mode and unlock them. This requires the correct PIN.
Why is my TemperZone TZT-701 Thermostat damper operating erratically?
If you are experiencing erratic damper operation with your TemperZone Thermostat, where the damper is constantly moving despite no change in the TZT-701 damper output, the issue might be due to some brands of dampers providing “feedback” voltage on the non-used terminals. Replace the damper with a brand that does not have this feedback problem.
What to do if PIN 21 doesn't work on my TemperZone TZT-701 Thermostat?
If PIN 21 does not grant you access to the installer mode on your TemperZone Thermostat, it means that the PIN has been changed. Contact installer for the current PIN. Return wall controller to temperzone or approved service agent for resetting. (Service Fee may apply)
Explains how to cycle through and understand the different operating modes.
Details how the thermostat controls fan operation in various modes.
Describes the automatic fan operation that syncs with heating/cooling cycles.
Explains the continuous fan operation mode.
Covers single and three-speed fan control and display indicators.
Details all icons, indicators, and segments on the thermostat's LCD screen.
Explains indicators for residential (Wake, Leave) and commercial (Start, Stop) events.
Describes various indicators like mode, time, temperature, locks, zones, and economy.
Explains timer functions like Auto Stop and After Hours Run Timer.
Details A/C and thermostat fault indicators and troubleshooting.
Explains the function of each button for controlling the thermostat.
Step-by-step guide to setting the thermostat's clock and day.
Instructions for setting up 4 daily heating/cooling events (Wake, Leave, Return, Sleep).
Options to continue programming or copy settings to other days.
How to configure zone control for programmed events.
How to temporarily adjust set temperatures for a single day.
Explains button functions for commercial mode operation.
Guide to setting the clock for accurate commercial programming.
Instructions for setting 2 daily events (Start, Stop) for commercial use.
How to temporarily extend operation beyond programmed times.
Explains button functions for manual operation.
Guide to setting the clock for display purposes in manual mode.
How to set and switch between Day and Night temperatures.
Explains the 'Auto OFF' timer feature for unoccupied rooms.
Displays outdoor or zone temperatures if sensors are fitted.
Uses outside air for cooling to save energy.
Controls temperature in multiple areas (zones) independently.
Prevents unauthorized tampering by locking thermostat functions.
How the thermostat intelligently controls fan speed for efficiency.
Ensures desired temperature is reached at the scheduled program start time.
Lists conditions not covered by the product warranty.
Provides contact information for temperzone offices worldwide.
General| Type | Programmable |
|---|---|
| Power Source | 24VAC |
| Display | LCD |
| Programmable Periods | 4 per day |
| Filter Change Reminder | Yes |
| Backlight | Yes |
| Dimensions | 120mm x 120mm x 28mm |
To Next Page
