11
TEMPMASTER
FORM TPM3-EG1 (518)
Double-Wall Construction – Double-wall construction is the standard construction of the
TempMaster OmniElite and incorporates powder coated pre-fabricated outer panels and
corner post for maximum exterior surface protection.
Factory Shrink-Wrap – All TempMaster OmniElite single package units are shipped from
the factory with factory-fresh shrink-wrap packaging. No longer does the contractor need
to worry about dirt and debris clogging up condenser coils or moisture leaking into the air
handler on the units way to the job site or rigging yard.
Copper Fins – For more extreme climates that aggressively can attack aluminum, copper
tube evaporator coils with copper fins are available. (This is not recommended for units in
areas where they may be exposed to acid rain or environments where ammonia is present.)
CONDENSER FEATURES AND OPTIONS
Scroll Compressors – Reliable, efficient, trouble-free operation is the true measure of
a single package unit’s value. That’s why TempMaster OmniElite single package units
use established scroll compressor technology to deliver dependable, economical perfor-
mance in a wide range of applications. With the TempMaster OmniElite single package
units, you get the latest generation of compressor enhancements added to the scroll’s
inherent strengths. The simplicity of a hermetic scroll compressor allows the use of fewer
moving parts to minimize breakdown.
Compressor Circuiting – The TempMaster OmniElite is designed so that only two scroll
compressors are in tandem within one refrigeration circuit. This means more reliable com-
pressors, and less equipment down time. With multiple circuits, if a compressor should
ever fail on one circuit, the other circuit/s will remain operational to work to maintain oc-
cupied loads. The TempMaster OmniElite system has three circuits in a unit.
Compressor Staging - The TempMaster OmniElite refrigeration system is equipped with
a unique staging algorithm. On first call for cooling the system calculates the amount of
cooling capacity needed by the space and automatically brings on enough cooling capac-
ity to meet this calculated need. Comfort cooling is provided quickly without the lag inher-
ent to staging on additional compressors to meet a high demand. Additionally, due to a
three independent circuit design with two compressors on each circuit, the TempMaster
OmniElite can provide superior granularity in terms of staging, which translates to best in
class part load efficiency or IEER.
Condenser Fan Motors – The condenser fan motors used on the TempMaster OmniElite
unit are totally enclosed air over (TEAO) to provide maximum durability through any sea-
son.
Replaceable Core Liquid Line Driers – Liquid line driers are standard on the TempMas-
ter OmniElite single package unit.
Post-Coated Condenser Coil Fins – Technicoat coil-coating process used on condenser
coils for seashore and other corrosive applications (with the exception of strong alkalis,
oxidizers, wet bromide, chlorine, and fluorine in concentrations greater than 100 ppm).
Compressor Sound Blankets – Optional compressor acoustic sound blankets are avail-
able for sound sensitive applications.
To Next Page
Loading...