EasyManua.ls Logo

TempMaster OmniElite - Introduction

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
TEMPMASTER
FORM TPM3-EG1 (518)
Introduction
The TempMaster
®
OmniElite
Single Package Units –
designed to meet the demands of the market for today and
tomorrow.
Better Economy...
Lower total cost of ownership
TempMaster provides a standard product offering that meets the latest ASHRAE
90.1 energy efciency requirements.
Unique compressor staging provides quick response to cooling needs and provides
multiple steps of capacity for high part load efciency.
Fully modulating gas heat and greater steps of capacity control offer superior off-
design performance while maintaining optimum occupant comfort.
Accurate ventilation control ensures that no more than the proper amount of ventila-
tion air is utilized. This avoids the energy cost of conditioning excess outside air and
simultaneously monitors all other unit functions for maximized energy efciency.
Flexible design congurations simplify the design process and allows the TempMas-
ter OmniElite to be applied to virtually any building application.
Accessibility through double-wall access doors, spacious compartments and sup-
portive oors improves serviceability.
Better Ecology...
Indoor air quality (IAQ) features for the indoor environment
A double-sloped stainless steel drain pan with a single drain con-
nection ensures that all condensate is voided from the drain pan. It
is also visible and accessible for periodic inspection and cleaning re-
quired by the ASHRAE 62 IAQ standard.
Double-wall construction of the roof, oor, doors, and walls pre-
vents insulation bers from entering the conditioned air. The inner liner
also facilitates periodic cleaning of the unit to prevent harmful build-up
of bacteria or contaminants.
The single package unit control center uses microprocessor
logic to analyze and optimize ventilation decisions and perform de-
mand ventilation, airow compensation, and airow measurement to
maintain the air quality at a healthy level.
LD07431
The single package unit user interface uses micro-
processor logic to optimize operation of the Temp-
Master OmniElite single package unit.

Related product manuals