11b mode： Allow the wireless client to connect
with the device in 11b mode at the
maximum speed of 11Mbps.
11g mode： Allow the 11g/11n-compliant client
device to connect with the AP at
the maximum speed of 54Mbps.
11b/g mode: Allow the 11b/g-compliant client
device to connect with the AP with
auto-negotiation speed, and 11n
wireless client to connect the
device with 11g speed.
11b/g/n mode： Allow 11b/g/n-compliant client
device to connect with the AP with
auto-negotiation speed
Main SSID ： SSID (Service Set Identifier) is the
unique name of the wireless network. This device
has two SSID and the main SSID is necessary.
Minor SSID：It is optional.
Broadcast (SSID): Select “Enable” to enable the
device's SSID to be visible by wireless clients.
The default is enabled.
MBSSID AP Isolation ： One access control
feature based on wireless MAC address. When
this feature is enabled, wireless clients connected
with the same SSID can not communicate with
each other. For example, configure main SSID as
AP1, minor SSID as AP2. PC1 and PC2 connect to
To Next Page
Loading...
