AP1 via wireless adapter, and configure PC1 and
PC2 in the same segment. After the feature is
enabled, two PCs can not communicate and share
network resource each other, but they can
communicate with wireless clients connected with
AP2. This feature is to isolate the communication
of wireless clients connected with the same SSID.
AP Isolation: One access control feature based
on SSID. When this feature is enabled, each of
your wireless clients will be in its own virtual
network and will not be able to communicate with
each other. When this feature is enabled, wireless
clients connected with the Main SSID and Minor
SSID can not communicate with each other, which
can secure the wireless network strongly. For
example, configure main SSID as AP1, minor
SSID as AP2. PC1 connects to AP1 via wireless
adapter; PC2 connecting to AP2. After the feature
is enabled, two PCs can not communicate and
share network resource each other. This feature is
to isolate the communication of wireless clients
connected with different SSID.
Tip: If you want to isolate all connected
wireless client's communication, please
enable MBSSID AP Isolation and AP
Isolation simultaneously.
BSSID ： Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC
address of wireless access point.
To Next Page
Loading...
