Tenda 4G03 Pro - Internet Connectivity; View Internet Status; Access Internet with SIM Card

Document Version: V1.1
3
1.3 Ports and buttons
Port/Button
Description
PWR
Power jack
WPS/RST
Used to reset the router, or start WPS negotiation of the router.
−
WPS: Press the button, and the Wi-Fi LED indicator ( ) blinks. Within 2
minutes, you can enable the WPS function of the client device (such as a
smartphone) to connect to the Wi-Fi network of the router without
entering the Wi-Fi password.
−
Reset: Hold down the button for about 8 seconds, and release it when all
LED indicators light off and then light up. The router is reset.
WAN/LAN
WAN/LAN multiplexing port.
LAN port by default. Used to connect to such devices as computers, switches or game
machines. When the Failover function is enabled, the WAN/LAN port only serves as a
WAN port.
LAN
Used to connect to such devices as computers, switches or game machines.
NANO SIM
Nano SIM card slot.
Insert your Nano SIM card into this slot.
PWR, WPS/RST, WAN/LAN, LAN, NANO SIM