Tenda 4G03 Pro - Connect to a Hidden Wi-Fi Network

Document Version: V1.1
48
6.1.4 Connect to a hidden Wi-Fi network
When a Wi-Fi network is hidden, you need to enter the Wi-Fi name manually first and connect to
it.
Assume that the parameters are:
−
Wi-Fi name: Jone_Doe
−
Encryption type: WPA/WPA2-PSK (recommended)
−
Wi-Fi password: Tenda+Wireless24
If you do not remember the wireless parameters of the Wi-Fi network, log in to the web UI of the
router and navigate to Wi-Fi Settings > Wi-Fi Name & Password to find them.
Procedure for connecting to the Wi-Fi network on your wireless device (Example: iPhone):
Step 1 Tap Settings on your smartphone, and tap WLAN.
Step 2 Enable WLAN.
Step 3 Scroll the Wi-Fi list to the bottom, and tap Other….
Step 4 Enter the Wi-Fi name and password, which are John_Doe and Tenda+Wireless24 in this
example.
Step 5 Set Security to WPA2/WPA3 (If WPA2/WPA3 is not available, select WPA2).
Step 6 Tap Join.
---End
After the configuration is completed, you can connect to the hidden Wi-Fi network to access the
internet.