Tenda 4G03 Pro - SIM PIN Management

Document Version: V1.1
65
Parameter description
Parameter
Description
PPTP Server
Used to enable or disable the PPTP server.
When it is enabled, the router functions as a PPTP server, which can accept the
connections from PPTP clients.
IP Address Pool
Specifies the range of IP address range within which the PPTP server can assign to PPTP
clients. It is recommended to keep the default settings.
MPPE Encryption
Used to enable or disable 128-bit data encryption. The encryption settings should be the
same between the PPTP server and PPTP clients. Otherwise, the communication cannot
be achieved normally.
User Name
Specify the VPN user name and password, which the VPN user needs to enter when
making PPTP dial-ups (VPN connections).
Password
Connection Status
Specifies the connection status of the VPN connection.
Operation
The available operations include:
: Used to add new PPTP user accounts.
: Used to disable the PPTP user account.
: Used to enable the PPTP user account.
: Used to delete the PPTP user account.
8.1.2 Enable internet users to access resources of the LAN
Scenario: You have set up an FTP server within the LAN of the router.
Goal: Open the FTP server to internet users and enable them to access the resources of the FTP
server from the internet.
Solution: You can configure the PPTP server function to reach the goal. Assume that:
−
The user name and password that the PPTP server assigns to the client are both
admin1.
−
The WAN IP address of router is 113.88.112.220.
−
The IP address of the FTP server is 192.168.0.136.
−
The FTP server port is 21.
−
The FTP login user name and password are both: JohnDoe.